Ingeniería Electrónica
Implementación de control resonante aplicado a un inversor trifásico en plataforma experimental para microrred AC
The growing energy demand has driven the search for alternative generation sources, such as solar photovoltaic and wind energy. However, since these sources generate energy as direct current (DC), devices such as inverters are required to convert it into alternating current (AC) and achieve its integration with the grid. The performance of these inverters largely depends on the control strategy employed, with the proportional-integral (PI) controller being widely used for these devices, although with recognized limitations in signal tracking and in reducing total harmonic distortion, both key aspects for ensuring the quality of the energy delivered to the grid. Given this problem, the design and implementation of a proportional-resonant (PR) controller is proposed, obtained through the frequency shifting of a PI control using the Laplace transform, as an alternative that improves reference signal tracking and strengthens the quality of the energy delivered by the inverter. The project involved plant modeling, PI controller design, PR controller design, simulation-based validation, controller tuning, and implementation on the OPAL-RT experimental platform for AC microgrids at Universidad Distrital Francisco José de Caldas.
Texto completo 147 páginas con texto
Leer la tesis completa Ficha en el repositorio
Contenido
- Resumen de los Resultados Propiosp. 131
- Trabajos Futurosp. 141
- nidos experimentalmente en este trabajop. 132
- mente, 1000 W)p. 132
- dientes al lazo de corrientep. 133
- dientes al lazo de voltajep. 134
- ganancia kip. 112
- Seguimiento de la señal de referencia αp. 113
- Seguimiento de la señal de referencia βp. 114
- Medición del THD del control de corriente PR con cargap. 117
- −1000Wp. 118
- Medición del THD del control de corriente PR a −1000Wp. 118
- control PRp. 76
- lón negativap. 120
- Cambio de referencia del control de voltaje PRp. 121
- 8.100 Respuesta al escalón del control de voltaje PRp. 122
- 8.101 Tiempo de establecimiento del control de voltaje PRp. 122
- 8.103 Medición del THD del control de voltaje PRp. 123
- se encontraba implementado anclado a la red a 1000Wp. 127
- clado a la red a 1000Wp. 129