Sporala red del conocimiento
EN
Universidad Pedagógica y Tecnológica de Colombia

Revista Facultad de Ingeniería

Characterization of copper smelter slag and recovery of residual metals from these residues

Solo ficha. El repositorio marca este trabajo como «Acceso abierto»: el PDF no es público, así que aquí no hay texto para leer. Ver la ficha en el repositorio.

Resumen

The pyrometallurgical copper extraction process generates 2.2 t of residues for each ton of produced metal. Initially, this paper shows the physical and chemical characterization of a copper processing residue, followed by the procedure to obtain the gold and silver that are contained in the copper residue. The characterization of a white metal oxidized calcine indicates a high content of copper as cupric ferrite, and important values of gold and silver. Gold and silver concentrations were 38.5 g t-1 and 1085 g t-1, respectively. The gold was found scattered in cupric ferrite grains, while the silver was dissolved in a matrix of Cu-S in amounts between 1 % and 50 %. Cyanidation tests showed that 95 % gold recovery could be obtained with a concentration of 0.06 g l-1 KCN, a pH of 10.5, room temperature, and a residence time of 80 h. When the temperature was increased to 75 °C, and the other cyanidation parameters were maintained intact, the same recovery was obtained but with a shorter residence time. Silver recovery was less than 30 % with a concentration of 1.2 g l-1 KCN, pH of 10.5, temperature of 45 °C, and a residence time longer than 72 h.

Palabras clave