Ingeniería Química · 2017
Potencial tolerante y de biodegradación del hongo de podredumbre blanca sobre llantas usadas
The present study evaluated the biodegradation potential of rubber of used tires by enzymatic action of a white rot fungus. Initially, the effect of the enzymatic action of the fungus on the mechanical, structural and chemical properties of the rubber was evaluated. Different sterilized cuts of 1 cm2 rims were inoculated on the rubber surface. After 45 days, changes in stress, surface changes from scanning electron microscopy (SEM) and changes in chemical structure were evaluated by Fourier transform infrared spectroscopy (FTIR), these analyzes showed the presence of erosion in the material by attacking its molecular bonds. Subsequently, the potential of the rim was determined to produce fungi biomass. For this, 6 concentrations of rim powder (2.5, 5, 7.5, 10, 12.5 mg / L) were studied and inoculated with mycelia of the fungus in Sabouraud agar. After 21 days, the germinated biomass at each substrate concentration was gravimetrically analyzed and modeled. As results, a proportional dependence of the growth of the biomass as a function of the substrate concentration was found. Finally, it is concluded that the white rot fungus has the potential to degrade the rubber of the used tires. Therefore, it may be a viable option to help biodegradation of used tires
Texto completo 63 páginas con texto
Leer la tesis completa Ficha en el repositorio
Contenido
- 1. PROBLEMA DE INVESTIGACÓNp. 16
- 1.1 PLANTEAMIENTO DEL PROBLEMAp. 16
- 1.2 FORMULACIÓN DEL PROBLEMAp. 18
- 1.3 JUSTIFICACIÓNp. 18
- 1.4 OBJETIVOSp. 21
- Objetivo General:p. 21
- Objetivos específicos:p. 21
- 2. MARCO DE REFERENCIAp. 22
- 2.1 ANTECEDENTESp. 22
- 2.2 MARCO TEORICOp. 24
- 2.2.1. Hongos de la podredumbre blancap. 25
- 2.2.2 Biodegradación de caucho naturalp. 26
- 2.3. MARCO LEGALp. 29
- 2.4. MARCO CONCEPTUALp. 30
- 3. DISEÑO METODOLOGICOp. 34
- 3.1 TIPO DE INVESTIGACIÓNp. 34
- 3.2 POBLACIÓN Y MUESTRAp. 34
- 3.3 TÉCNICAS DE RECOLECCION DE DATOSp. 35
- 3.3.1 Fuentes primariasp. 35
- 3.3.2 Fuentes secundariasp. 35
- 3.3.3 instrumentosp. 36
- 3.4 HIPOTESISp. 36
- 3.5 VARIABLESp. 36
- 3.5.1 Variables independientesp. 36
- 3.5.2 Variables intervinientep. 36
- 3.5.3 Operacionalización de variablesp. 37
- 3.6 PROCESAMIENTO DE LA INFORMACIÓNp. 37
- 3.6.1 Polímerop. 37
- 3.6.2 Preparación del inoculop. 38
- 3.6.3 Inspección microscópica electrónicap. 40
- 3.6.4 Cinética de germinación del hongop. 40
- 3.6.5 Inspección por espectroscopía infrarroja por transformada de fourier (FTIR)p. 40
- 3.6.6 Inspección por análisis de tensiónp. 40
- 3.6.7 Modelamiento del proceso germinativop. 41
- 3.7 ANÁLISIS ESTADÍSTICOp. 42
- 4 RESULTADOSp. 43
- 4.1 INSPECCION SEM DEL PROCESO BIODEGRADATIVOp. 43
- 4.2 INSPECCION POR ANALISIS DE TENSIÓNp. 44
- 4.3 INSPECCIÓN DE ANALISIS FTIRp. 45
- BIOMASAp. 47
- 4.5 ANÁLISIS DE BONDAD DE LOS MODELOS MATEMATICOSp. 47
- 5. CONCLUSIONESp. 51
- 6. RECOMENDACIONESp. 52
- BIBLIOGRAFIAp. 53
- ANEXOSp. 62
- VH2 de G. polyisoprenivoransp. 28
- a biodegradación luego 0 días (a), 16 días (b) y 40 días (c)p. 43
- muestras de llanta sin hongo y con hongop. 44
- analizadas: Caucho con hongo (azul), Caucho sin hongo (negro)p. 46
- concentraciones de llantap. 47
- el modelo de monodp. 47
- el modelo de Haldanep. 48
- el modelo de Hinshelwoodp. 48
- Tabla 1. Variables de mediciónp. 37
- Tabla 2. Composición de la llanta en % P/Pp. 38
- blanca estudiado con la información de la literaturap. 39
- Tabla 4. Valores del ajuste de los modelos matemáticosp. 49
- Tabla 5. Parámetros de los modelos de germinación microbianap. 49
- Anexo 1.1 Analisis Estadistico por MiniTabp. 62