Ingeniería de Sonido · 2020
Algoritmo para la cancelación de realimentación acústica
An algorithm for the control of acoustic feedback functions as a control system whose main objective is to uncouple the closed-loop feedback of an electro-acoustic system, once it becomes unstable. This process of control over the electroacoustic path provides advantages, among which the optimization of time is emphasized when adjusting a monitoring system and preventing damage to the equipment used. In the present work the origin of the instability of the sound reinforcement systems is detailed and an algorithm is proposed for the correction of multiple feedbacks, developed under the principle of suppression of couplings with slot filter (SAFR), detecting peaks of spectral energy and applying a second-order notch IIR filter in the discriminated frequencies by means of the RPPL criterion (peak power limit ratio). Quantitative and qualitative audio signals were analyzed with people performing sound reinforcement works, this in order to detect signal degradations as changes in the total harmonic distortion of the signal and possible variations of the fundamental frequency, of the same In this way, the group delay generated by the filter is measured. The results showed that the algorithm for the control of acoustic feedback fulfills the objective in estimation and attenuation of spectral peaks, showing faults in the cancellation of low frequency because the bandwidth of the filter is not adaptable according to the frequency. The group delay generated by IIR filters in cascade is small and possible to implement up to order 33, for this reason the algorithm can be implemented in contexts of sound reinforcement. The result of the qualitative test evinced that the algorithm is inefficient when it is implemented in a signal adder, but it presents good performance when implemented in individual signals
Texto completo 53 páginas con texto
Leer la tesis completa Ficha en el repositorio
Contenido
- RESUMENp. 10
- ABSTRACTp. 11
- INTRODUCCIÓNp. 12
- PLANTEAMIENTO DEL PROBLEMAp. 13
- JUSTIFICACIÓNp. 14
- ESTADO DEL ARTEp. 15
- OBJETIVOSp. 17
- Objetivo Generalp. 17
- Objetivos específicosp. 17
- MARCO TEORICOp. 18
- Transformada discreta de Fourier (DFT)p. 18
- Transformada zp. 18
- Función de transferenciap. 19
- Filtro IIR tipo notch de segundo ordenp. 19
- Sistema de lazo cerradop. 22
- Corrección de realimentaciónp. 22
- Supresión de acoples con filtros de ranura (SAFR)p. 22
- Relación pico potencia promediop. 23
- Relación pico potencia armónicap. 24
- Relación pico potencia vecinasp. 24
- Relación pico potencia límitep. 24
- METODOLOGIAp. 26
- frecuencia sintonizadap. 26
- Síntesis de señalesp. 26
- Discretización de la señal y evaluación por intervalos de muestrasp. 26
- Detección de picos y estimación de frecuenciap. 27
- Discriminación de realimentaciones y corrección de inestabilidadp. 28
- Adaptar el algoritmo para la cancelación de múltiples realimentacionesp. 28
- Evaluar la respuesta del algoritmo bajo criterios objetivos y subjetivosp. 30
- Medición de respuesta del algoritmo ante una señal que presenta una realimentaciónp. 30
- realimentacionesp. 17
- de múltiples realimentacionesp. 32
- Prueba subjetivap. 32
- RESULTADOS Y DISCUSIÓNp. 34
- Análisis de la respuesta del algoritmo ante una realimentación simplep. 35
- Corrección de realimentacón a 500Hzp. 35
- Corrección de realimentación a 1k Hzp. 36
- Corrección de realimentación a 8k Hzp. 38
- Respuesta del algoritmo para THD y frecuencia fundamentalp. 40
- Análisis de la respuesta del algoritmo a múltiples realimentacionesp. 41
- Corrección de múltiples realimentaciones en una señal simplep. 41
- Corrección de múltiples realimentaciones para una señal compuestap. 43
- Retraso de grupo generado por los filtros IIRp. 45
- Prueba subjetivap. 46
- CONCLUSIONESp. 48
- Limitacionesp. 48
- REFERENCIASp. 49
- ANEXOSp. 51
- TABLA I. CRITERIOS DE EVALUACIÓN [20]p. 33
- DE 125 A 16K POR BANDAS DE OCTAVAp. 41
- Fig. 1. Ubicación de polos y ceros para un filtro notch tipo IIR [12]p. 21
- acusticap. 23
- realimentacionesp. 17
- implemenentadop. 42
- Fig. 5. Espectrograma del audio con corrección de realimentación en 500Hzp. 36
- implemenentadop. 42
- Fig. 7. Espectrograma del audio con corrección de realimentación en 1k Hzp. 38
- implemenentadop. 42
- Fig. 9. Espectrograma del audio con corrección de realimentación en 8k Hzp. 40
- filtro implemenentadop. 42
- realimentación en el audio de mezclap. 44
- Fig. 14. Retardo de grupo generado por cada filtro dependiendo de la frecuenciap. 45