Maestría en Ingeniería · 2021
“DIMCUNET” Programa de cálculo para el dimensionamiento de cunetas de recolección de aguas lluvias, en vías urbanas y carreteras
The National Roads Institute (INVIAS, for its acronym in Spanish) presented the Road drainage manual, document used as a guide for the design of hydraulic structures related to road infrastructure. It presents and recommends for Colombia the design for ditches with the triangular geometric section for being the most practical, simple to build and for which you need less area. The manual also presents other geometric sections, but without the corresponding design equations for each type of ditch, leaving the sizing of these structures at the discretion of the designers. Some professionals and consulting firms commonly use spreadsheets to perform these calculations. This implies significant work for the use to understand, establish the validity of each programmed cell, verify the relevance and applicability of these calculations, with the motivation of preventing these applications from becoming black box models. Not to mention that aspects such as hypotheses, limitations, restrictions are not appreciable in this type of document. For this reason, it is necessary to implement a software that allows to optimize time and at the same time an application that has the design equations for different forms of cross sections of ditches.
Full text 366 pages with text
Read the full thesis Record in the repository
Contents
- & Cárdenas, 2011b)p. 35
- Tomada de (Cárdenas Quintero & Marbello, 2011)p. 36
- Marbello, 2011)p. 37
- & Marbello, 2011)p. 38
- Quintero & Marbello, 2011)p. 37
- Quintero & Marbello, 2011)p. 37
- Marbello, 2011)p. 40
- Cárdenas, 2011b)p. 41
- Tabla 1. Elementos Geométricosp. 22
- Tabla 2. Dimensiones Mínimasp. 27
- Tabla 3. Parámetros de Entrada. Ecuación de Manning – Software FlowMasterp. 56
- Tabla 4. Parámetros de Entrada. Ecuación de D&W-C&W – Software FlowMasterp. 61
- Tabla 5. Parámetros de Entrada. Ecuación Manning - Ecuación D&W-C&Wp. 64
- Tabla 6. Parámetros de Entrada. Ecuación de Manning – Programa DIMCUNETp. 66
- Tabla 7. Parámetros de Entrada. Ecuación de D&W-C&W –Programa DIMCUNETp. 74
- Tabla 8. Resultados de la Ecuación de Manning – Programa DIMCUNETp. 81
- Tabla 9. Resultados de la Ecuación de D&W - C&W – Programa DIMCUNETp. 82
- Tabla 10. Resultados Comparativosp. 83
- Ilustración 1. Descripción de Capasp. 47
- Ilustración 2. Descripción de la Capa Businessp. 48
- Ilustración 3. Descripción de la Capa DIMCUNETp. 49
- Ilustración 4. Descripción de Crear un Proyecto en FlowMasterp. 57
- Ilustración 5. Descripción de selección del coeficiente de rugosidad – FlowMasterp. 57
- Ilustración 6. Descripción de cálculo sección Rectangular – Manning - FlowMasterp. 58
- Ilustración 7. Descripción del cálculo de la Profundidad Normal – FlowMasterp. 58
- Ilustración 8. Descripción de la Gráfica, Sección Rectangular- Manning - FlowMasterp. 59
- FlowMasterp. 56
- Ilustración 16. Descripción de cálculo sección Rectangular-Manning-FlowMasterp. 64
- FlowMasterp. 56
- DIMCUNETp. 48
- DIMCUNETp. 48
- DIMCUNETp. 48
- DIMCUNETp. 48
- DIMCUNETp. 48
- DIMCUNETp. 48
- – DIMCUNETp. 77
- DIMCUNETp. 48
- DIMCUNETp. 48
- DIMCUNETp. 48
- – DIMCUNETp. 77
- DIMCUNETp. 48
- DIMCUNETp. 48
- Sección Rectangular – DIMCUNETp. 79
- DIMCUNETp. 48
- DIMCUNETp. 48