Maestría en Ingeniería · 2019
Sistema de control y monitoreo de consumo energético para equipos de climatización orientado a internet de las cosas (IOT)
HVAC systems (Heating, Ventilating and Air Conditioning) consume 40% of total domestic energy, with more than 25% of energy demand in homes and offices in Colombia. According to what has been studied in the state of the art, there are various factors that influence the efficiency of these systems. Some of the factors that influence the behavior of air conditioning systems are: the efficiency inherent to the manufactured system (intrinsic characteristics), the environmental conditions of each region (extrinsic conditions, such as external temperature), the responsible use by the end users, and the perception of comfort on the part of the occupants of the enclosure where the system operates, among others. This research addresses the problem of energy consumption of HVAC systems, from the view of rational consumption based on their operating conditions. The above implies to analyze and correlate the behavior of HVAC systems with changes in the behavior of environmental (external) temperature conditions. In addition, integrate control and monitoring solutions to the Internet of Things (IoT) technologies to manage valuable information based on real time data analysis. Thus, this document summarizes the development of a control system and monitoring of energy consumption for an air conditioning (AC) system oriented to IoT. With the implementation of IoT-based technologies, a significant contribution is made to the monitoring tools, data acquisition and therefore, monitoring for the evaluation of the control techniques of these systems. The monitoring action generates large amounts of data that may be of interest to users, researchers or distribution and marketing companies of air conditioning systems. The document defines the requirements and control techniques for the development of an embedded device using an architecture based on the MQTT protocol applied to the air conditioning system. As well as the stages considered during the implementation in a conventional mini-split HVAC system are described. Finally, the results of the control and monitoring system are compared with the data of the same system without the embedded device in order to validate operation, implementation and integration ith the system
Full text 88 pages with text
Read the full thesis Record in the repository
Contents
- Lista de tablas y figurasp. 7
- Introducciónp. 16
- El Problemap. 18
- Planteamiento del Problemap. 18
- Justificaciónp. 20
- Objetivosp. 17
- 3.1. Objetivo Generalp. 21
- 3.2. Objetivos Específicosp. 22
- Marco Teórico - Conceptualp. 22
- Antecedentesp. 22
- 4.1. Monitoreo y control de sistemas HVACp. 22
- Referentes Teóricosp. 26
- 5.1. Sistemas de Climatización (HVAC)p. 26
- 5.2. Sistemas de Aire Acondicionadop. 28
- 5.3. Clasificación de los sistemas de aire acondicionadop. 30
- 5.4. Internet de las Cosas – IoTp. 39
- 5.5. Tarjeta de desarrollo NODEMCU v3p. 44
- Materialesp. 48
- Tarjeta de Desarrollo NodeMcu V3.0p. 48
- Sensoresp. 49
- 7.1. Sensor DHT21p. 50
- 7.2. Sensor de corriente no invasivo ECS1030p. 51
- 7.3. Módulos sensor emisor (KY-005) y receptor (KY-022)p. 52
- 7.4. Módulos sensor de Voltajep. 53
- Metodologíap. 54
- Tipo, enfoque y alcance de la investigaciónp. 54
- Diseño de la investigaciónp. 54
- 9.1. Fase de Análisis (Fase 1)p. 55
- 9.2. Fase de Diseño (Fase 2)p. 55
- 9.3. Fase de Implementación (Fase 3)p. 56
- 9.4. Fase de Validación (Fase 4)p. 56
- Desarrollo del sistema de monitoreo y controlp. 57
- 10.2. Diseño y simulación del sistema de control de ACp. 58
- 10.3. Implementación del sistema de control de AC en un recintop. 62
- 10.4. Validación del sistemap. 65
- Análisis y Resultadosp. 66
- Análisis de la literaturap. 66
- Diseño del sistema de control de ACp. 68
- Implementación del Sistemap. 70
- Validación del sistemap. 65
- 14.1. Monitoreo de temperatura internap. 72
- 14.2. Potencia consumidap. 73
- 14.3. indicadores de temperatura y consumo instantáneop. 73
- 14.5. Corriente instantáneap. 74
- HVACControlerp. 75
- Conclusionesp. 78
- Referenciasp. 80
- Tabla 5.1 Comparativo entre los protocolos utilizados para IoT…………………p. 44
- Tabla 7.4. Características del sensor DHT21………………………………………p. 51
- Figura 5.1. Circuito básico de refrigeración por comprensión de vaporp. 29
- Figura 5.2. Taxonomía de las técnicas de Controlp. 38
- Figura 5.3. Diagrama de bloques del controlador PIDp. 39
- Figura 5.4. Internet de las cosasp. 40
- Figura 5.5. Población mundial respecto dispositivos conectados a internetp. 41
- Figura 5.6. Arquitectura MQTTp. 43
- Figura 5.7. Modelo de publicación y suscripción de MQTTp. 43
- Figura 5.8. Tarjeta NodeMCU v3p. 45
- Figura 5.9. Arduino uno, leonardo y101p. 45
- Figura 5.10. Tarjeta Raspberry pi 3p. 46
- Figura 6.11. Tarjeta de desarrollo New NodeMcu v3p. 49
- Figura 7.12. Sensor Dht 21 aspecto externo e internop. 50
- Figura 7.13. Sensor de corriente No invasivo ECS1030p. 52
- Figura 7.14. Modulo emisor infrarrojop. 52
- Figura 7.15. Modulo receptor de infrarrojos KY-022p. 53
- Figura 7.16. Circuito para sensor de voltajep. 54
- Figura 9.17. Flujograma de la soluciónp. 57
- Figura 10.18. Arquitectura para la captura de datos inicialesp. 59
- Figura 10.19. Diagrama de bloques y ecuación de transferencia del sistemap. 59
- Figura 10.20. Simulación de la técnica de control clásico Proporcional Integralp. 60
- Figura 10.21. Conexiones para decodificar los código IRp. 60
- Figura 10.22. Arquitectura del sistema usando el protocolo MQTTp. 62
- Figura 10.23. Montaje del Brokerp. 63
- Figura 10.24. montaje del sensor ECS1030 en equipo de refrigeraciónp. 63
- Figura 10.25. Montaje de sensor de corriente, voltaje y temperaturap. 64
- Figura 10.26. Montaje de actuadorp. 64
- Figura 10.27. Visualización de las variables monitoreadasp. 65
- Figura 11.28. Resultados del análisis de la literaturap. 67
- Figura 11.29. Resultados de la vigilancia tecnológicap. 68
- Figura 12.30. Grafica de la temperatura y el consumo del equipo en estudiop. 69
- Figura 13.31. Montaje del sistema completop. 70
- Figura 13.32. Visualización de la plataformap. 71
- Figura 14.33. Tablero inicial de la plataforma HVACcontrolerp. 72
- Figura 14.34. Grafica de monitoreo de temperatura internap. 72
- Figura 14.35. Monitoreo de la potencia consumida en KWp. 73
- Figura 14.36. Indicadores de potencia y temperaturap. 74
- Figura 14.37. Temperatura externa actual y potencia promediop. 74
- Figura 14.38. Temperatura externa actual y potencia promediop. 75
- Figura 14.39. Grafica de variables implementando el sistema de controlp. 75
- Figura 14.40. Comparación de temperatura internap. 77
- Figura 14.41. Comparación del consumo de potencia del sistemap. 77