Bogotá - Ingeniería - Doctorado en Ingeniería - Ingeniería Química · 2022
Estudio de la actividad fotocatalitica de electrocatalizadores de TiO2 nanoestructurados y modificados en la produccion de hidrogeno
Se obtuvieron nanotubos de TiO2 dopados con níquel, con un notorio desempeño fotocatalítico, gran área superficial y con dimensiones y características controladas, mediante anodización electroquímica. Los resultados complementan el estado del arte de la síntesis de este tipo de nanoestructuras, establece relaciones entre las características morfológicas obtenidas y las variables de síntesis. Estas relaciones permiten establecer zonas de síntesis donde se puede controlar la morfología de los nanotubos. Se discuten los resultados de tratamientos que modifican la estructura cristalina de los nanotubos y su superficie. Se discute el efecto del tratamiento térmico sobre la evolución de la fase anatasa del rutilo en los nanotubos de TiO2. Se establece un protocolo para modificar superficialmente los nanotubos de TiO2 con nanopartículas de níquel, mediante electrodepositación. Para cada tratamiento se realiza una caracterización morfológica, cristalina y elemental de las muestras. Se efectúa la caracterización electroquímica de los fotoelectrodos sintetizados y los efectos de las morfologías de las nanoestructuras sobre su comportamiento fotoelectroquímico. Los análisis revelan el comportamiento eléctrico de las nanoestructuras sintetizadas dentro de una celda fotoelectroquímica, así como el tipo de semiconductor y el rol del níquel en la recombinación de cargas fotogeneradas. Se revisan los circuitos equivalentes que representan el comportamiento de nanotubos modificados con níquel en la producción fotoelectroquímica de hidrógeno. (Texto tomado de la fuente)
Full text 178 pages with text
Read the full thesis Record in the repository
Contents
- 1. INTRODUCTIONp. 19
- Research motivationp. 20
- Research motivationp. 20
- 2. CONCEPTUAL FRAMEWORKp. 23
- Introductionp. 19
- Hydrogen and its role as an energy vectorp. 24
- Current hydrogen production processesp. 26
- Hydrogen production from natural gasp. 27
- Additional hydrogen production industrial processesp. 28
- Hydrogen production from alternative energy sourcesp. 28
- Electrochemical hydrogen productionp. 31
- Basic principles of photocatalysisp. 34
- Photocatalyst and conditions for photocatalysisp. 38
- Photoactivity and improvement of TiO2 photocatalytic activityp. 42
- Bibliographyp. 45
- FORMATIONp. 51
- Introductionp. 19
- Methods of synthesis of TiO2 nanostructuresp. 52
- Synthesis of TiO2 nanotubes by anodic oxidationp. 55
- electrochemical anodizationp. 56
- TiO2 nanotube formation mechanismsp. 57
- Model of oxidation / dissolution assisted by an electric fieldp. 57
- Plastic oxide flow patternp. 59
- Model of nanoporous formation of oxides and hydroxidesp. 60
- Bibliographyp. 45
- ANODIZATIONp. 63
- Introductionp. 19
- nanotubes by electrochemical anodizationp. 75
- of TiO2 nanotubesp. 98
- Voltage applied in the electrochemical cellp. 77
- Deionized water concentration in the electrolytep. 82
- Concentration of fluoride ions in the electrolytep. 83
- Morphological characterization of TiO2 nanotubesp. 86
- Growth sequence of TiO2 nanotubesp. 86
- Influence of voltage on the formation and growth of TiO2 nanotubesp. 89
- TiO2 nanotubesp. 98
- Analysis of structural TiO2 nanotube dimensionsp. 104
- Surface area determinationp. 112
- Conclusionsp. 112
- Bibliographyp. 45
- NANOTUBESp. 120
- Introductionp. 19
- Electrodeposition setup and procedurep. 130
- Synthesis if TiO2 nanotubesp. 130
- Nickel surface modification of TiO2 nanotube arraysp. 132
- Analysis of photocatalystsp. 134
- Structural and Morphological analysis of TiO2 nanotubesp. 134
- nanotube arraysp. 139
- Wet impregnation methodp. 139
- Direct Electrodeposition methodp. 141
- Pulse Electrodeposition methodp. 145
- Electrochemical analysis of Ni doped TiO2 nanotube arraysp. 154
- Conclusionsp. 112
- Bibliographyp. 45
- 6. CONCLUSIONS AND FUTURE OUTLOOKp. 177
- Figure 2.1: Schematic of a fuel cell. Source: The Authorp. 26
- Figure 2.2: General diagram of an electrochemical cell. Source: The Authorp. 31
- Figure 2.3: Band gap model in solids. Source: The Authorp. 35
- accepts electrons. D: electron donating substance. Source: The Authorp. 36
- that accepts electrons. D: electron donating substance. Source: The Authorp. 37
- with respect to the electrochemical dissociation of water. Source: The Authorp. 39
- Fig. 2.7. Location of the Fermi Energy in solids. Source: The Authorp. 40
- The Authorp. 42
- Source: The Authorp. 37
- Source: The Authorp. 37
- Fig. 3.3. Typical setup used in the synthesis of TiO2 nanotubes. Source: The Authorp. 55
- the electric field. Source: self madep. 58
- Source: The Authorp. 37
- Fig. 4.2 Electrolytic cell and essential components for operation. Source: The Authorp. 70
- formation of TiNTs. Source: The Authorp. 71
- of Titanium. Source: The Authorp. 72
- self-madep. 74
- titanium sheetsp. 75
- electrolyte composed of ethylene glycol, 0.15% NH4F and 2.0% deionized water at room temperaturep. 78
- Electrolyte: 96.97% EG, 0.15% AF, 2.0% DIW. Voltages used: (a) 40 V, (b) 60 V, (c) 80 Vp. 79
- temperaturep. 80
- nanotubes, (c) view of the top end nanotubesp. 81
- using 0.22% AF and different concentrations of DIW in ethylene glycol. (a) 2.0%, (b) 3.2%, (c) 3.8%p. 82
- using 2.8% DIW and different concentrations of AF in ethylene glycol for 60 min: (a) 0.15%, (b) 0.22%p. 83
- AF, 2.0% DIW) at different voltages for 60 minutes. 40 V a and b, 60 V c and d, 80 V e and fp. 85
- in EG + 0.22% AF + 2.85% DIWp. 86
- for 1 hour in EG + 0.22% AF + 2.85% DIW. The inset shows the profile for the first 300 sp. 88
- 96.58% EG, 0.22% AF, 3.2% DIWp. 90
- area (c)p. 91
- area (c)p. 92
- electrolyte based on EG, AF and DIW. (a) 0.15% AF and (b) 0.22% AFp. 97