Bogotá - Ingeniería - Doctorado en Ingeniería - Ciencia y Tecnología de Materiales · 2025
Parameters of additive manufacturing and post-processing surface finishing in cobalt-chromium alloy joint implants bearing surfaces manufactured using Selective Laser Melting
Las superficies de los implantes articulares, conocidas como superficies de pares de fricción, son cruciales para la movilidad y funcionamiento adecuado de los implantes. Estas superficies deben tener un acabado específico para garantizar el funcionamiento óptimo y evitar fallas prematuras. La manufactura mediante Selective Laser Melting (SLM) permite la creación de implantes individualizados de gran complejidad y geometrías en un tiempo y costo menores que las técnicas tradicionales. Sin embargo, debido a la naturaleza del proceso, se requiere el uso de postprocesos para obtener las superficies de pares de fricción necesarias. Esta investigación evaluó los parámetros de manufactura para SLM y tres diferentes postprocesos: micro mecanizado, micro granallado y laser polishing. Se determinaron los parámetros de posprocesamiento que permiten la adecuada manufactura de las superficies de pares de fricción. Se encontró que la mejor manera de manufacturar estas superficies es emplear parámetros de manufactura en SLM que proporcionen una rugosidad homogénea en toda la superficie, seguido de un posproceso de acabado superficial mediante laser polishing. Con esta combinación de técnicas, se lograron los valores de rugosidad superficial recomendados para garantizar la calidad y funcionalidad de las superficies en pares de fricción de implantes articulares fabricados mediante SLM (Texto tomado de la fuente).
Full text 161 pages with text out of 162
Read the full thesis Record in the repository
Contents
- Introductionp. 21
- Theoretical background and state of the artp. 25
- implantsp. 25
- 1.1.2 Selective Laser Melting parametersp. 30
- surfaces using SLMp. 31
- implantsp. 33
- 1.2.1 Thermal post-processing: Annealingp. 34
- 1.2.2 Micro-sandblastingp. 34
- Micro-machiningp. 35
- 1.3.1 Laser polishingp. 35
- Effects of post-processing on surface integrity of SLM manufacturing partsp. 36
- 1.4.1 Roughness surface characterizationp. 37
- 1.4.2 Residual stresses characterizationp. 40
- Selective Laser Meltingp. 15
- Methodologyp. 49
- Equipment and materials usedp. 49
- 2.1.1 Selective Laser Melting equipment and CoCr alloy usedp. 49
- 2.1.2 Thermal post-processing: Annealingp. 34
- 2.1.3 Micro-sandblastingp. 34
- 2.1.4 Micro-machiningp. 35
- 2.1.5 Laser polishingp. 35
- 2.1.6 Roughness measurement equipmentp. 56
- Research methodology usedp. 57
- 2.2.1 Design of experiments (DoE) usedp. 57
- 2.2.2 Methodology used for choosing the Selective Laser Melting parametersp. 58
- 2.2.3 Methodology used for choosing the post-processing parametersp. 60
- 2.2.4 Methodology used for choosing the surface quality testp. 63
- Manufacturing parameters for the Selective Laser Melting techniquep. 66
- Manufacturing parameters for Selective Laser Meltingp. 66
- the manufacturerp. 66
- 3.1.2 Selective Laser Melting parameters proposedp. 69
- 3.1.3 Surface roughness manufacturing process predictionp. 77
- Selective Laser Melting techniquep. 87
- Post-processing parameters for micro-sandblastingp. 92
- 4.1.1 Micro-sandblasting post-process manufacturing predictionp. 97
- 4.1.2 Surface quality analysis for the post-process of micro-sandblastingp. 99
- sandblasting processp. 103
- Post-processing parameters for the micro-machining processp. 106
- 5.1.1 Micro-machining post-process manufacturing predictionp. 110
- 5.1.2 Surface quality analysis for the post-processing of micro-machiningp. 111
- processp. 162
- Post-process parameters for laser polishing techniquesp. 118
- 6.1.1 Laser polishing post-process manufacturing predictionp. 134
- 6.1.2 Surface quality analysis for the post-processing of laser polishingp. 136
- Conclusions and Future Perspectivep. 143
- Conclusionsp. 143
- Recommendationsp. 150
- effect, b) dross. Source: Authorsp. 27
- Source. Authorsp. 28
- manufactured by SLM. Source. Authorsp. 28
- Figure 1-4. Residual stresses result from different processes. Source: [78]p. 41
- Source: [78]p. 42
- lattice planes. Source: [80]p. 43
- different required surfaces: rough and with polished surfaces. Source: [87]p. 46
- Figure 2-2. Printing direction of the specimen. Source: Authorsp. 50
- Figure 2-3. SLM equipment used in this research. Source: [97]p. 51
- Figure 2-4. Annealing process for pieces made by SLM. Source: [97]p. 52
- Figure 2-5. Sintering furnace used during the annealing post-process. Source: [100]p. 52
- Figure 2-6. Sandblaster used during this research. Source: [101]p. 53
- micro-sandblasting. Source: Authorsp. 53
- Source: Authorsp. 54
- Figure 2-9. Tool used for surface micro-machining of the specimens. Source: [102]p. 55
- Source: [104]p. 55
- Figure 2-11. Optical microscope used in this research. Source: [106]p. 57
- Authorsp. 61
- Authorsp. 61
- Figure 2-14. Methodology used for the third research objective. Source: Authorsp. 64
- of residual stresses. Source: [113]p. 65
- Authorsp. 61
- thermal post-treatment. Source: Authorsp. 68
- Source: Authorsp. 54
- Source: Authorsp. 54
- Source: Authorsp. 54
- Source: Authorsp. 54
- Source: Authorsp. 54
- Source: Authorsp. 54
- Source: Authorsp. 54
- Source: Authorsp. 54
- Source: Authorsp. 54
- Authorsp. 61
- Authorsp. 61
- Figure 3-14. Residual stress vs depth for CoCr as-built. Source: Authorsp. 82
- Authorsp. 61
- Source: Authorsp. 54
- specimen manufacture using SLM. Source: Authorsp. 84
- surface of the CoCr as-built material. Source: Authorsp. 84
- Source: Authorsp. 54
- Authorsp. 61
- after the thermal post-treatment. Source: Authorsp. 86
- Source: Authorsp. 54
- Authorsp. 61
- sandblasting on the roughness response Sa, Sq, and Sz. Source: Authorsp. 94
- versus pressure. Source: Authorsp. 98
- versus blasting times. Source: Authorsp. 98
- Authorsp. 61
- process. Source: Authorsp. 101
- embedded particle. Source: Authorsp. 102
- Authorsp. 61
- presence of blasting material on the specimen's surface. Source: Authorsp. 103
- parameters: nozzle distance of 1.5 cm and particle size of 250 µm. Source: Authorsp. 104
- Source: Authorsp. 54
- and Sz. Source: Authorsp. 108
- Ssk, and Sdr. Source: Authorp. 109
- Spk, and Vmc. Source: Authorsp. 110
- Figure 5-4. Contour plot of Sa: Feed speed vs cutting speed. Source: Authorsp. 111
- Authorsp. 61
- Authorsp. 61
- machining process. Source: Authorsp. 114
- Source: Authorsp. 54
- for the micro-machining post-process. Source: Authorsp. 117
- polishing post-process parameters. Source: Authorsp. 119
- Source: Authorsp. 54
- E= 2.08 J/cm2. Source: Authorsp. 122
- E= 1.56 J/cm2. Source: Authorsp. 122
- E= 1.25 J/cm2. Source: Authorsp. 123
- Authorsp. 61
- response variable Sa. Source: Authorsp. 126
- and a laser power of 300 W, resulting in a Sa of 1.5 µm. Source: Authorsp. 126
- and a laser power of 300 W, resulting in a Sa of 4.3 µm. Source: Authorsp. 127
- laser polishing parameters on the response Sa. Source: Authorsp. 129
- using the recommended parameters. Source: Authorsp. 132
- laser power, and hatch distance on the response variable Sa. Source: Authorsp. 135
- Laser power. Source: Authorsp. 136
- Authorsp. 61
- Source: Authorsp. 54
- material reheating after laser polishing post-process. Source: Authorsp. 139
- treatment. Source: Authorsp. 140
- post-treatment of laser polishing. Source: Authorsp. 142
- Source: Authorsp. 54
- specimens. Source: Authorsp. 133
- parameters recommended for SLM. Source: Authorsp. 149
- post-process proposed for manufacturing bearing CoCr surfaces. Source: Authorsp. 149