Ingeniería Química · 2018
Diseño y simulación de una torre de destilación para la recuperación de condensado en la producción de nitrato de amonio en una empresa petroquímica productora de fertilizantes en Cartagena
In the next project will be presented the alternative that will allow to recover the percentage of water that is in the process condensate, result of the operations in the ammonium nitrate plant of a fertilizer production company located in Cartagena, which contains traces of ammonia above the regulation in Decree 1594 of 1984 with respect to the dumping of industrial wastewater. To give solution to the above, we propose the design of a distillation column that will allow to recover 99% of the water contained in the tower feeding, separating the traces of ammonia contained in the condensate. This scenario can be analyzed by using the Aspen Process simulation Tool "HYSYS", contemplating the operational alternatives for the treatment of the currents involved and also obtain a model that allows to comply with the Specifications needed to reuse current products, at the end of the simulation was expected to obtain a distillation flow whose composition is 99% ammonia, thus releasing the current of funds from the contamination that this substance represents and Recovering the water from this operation, this was achieved by optimizing the initial design by means of a suggested energy integration for the purposes of this project
Full text 75 pages with text
Read the full thesis Record in the repository
Contents
- INTRODUCCIÓNp. 15
- PROBLEMA DE INVESTIGACIÓNp. 16
- PLANTEAMIENTO DEL PROBLEMAp. 16
- FORMULACIÓN DEL PROBLEMAp. 18
- JUSTIFICACIÓNp. 18
- OBJETIVOSp. 19
- Objetivo generalp. 19
- Objetivos específicosp. 20
- MARCO DE REFERENCIAp. 21
- ANTECEDENTES INVESTIGATIVOSp. 21
- MARCO TEÓRICOp. 22
- Destilación:p. 22
- Método corto de diseño Fenske-Underwood-Gilliland (FUG):p. 23
- Ley de Raoult:p. 28
- Equilibrio de fases:p. 28
- MARCO LEGALp. 29
- MARCO CONCEPTUALp. 30
- Operaciones unitarias:p. 30
- Equilibriop. 30
- Presión de vaporp. 30
- Volatilidad relativap. 31
- Punto de ebulliciónp. 31
- Punto de burbujap. 31
- Punto de rocíop. 31
- Condensadorp. 31
- Rehervidorp. 31
- DISEÑO METODOLÓGICOp. 32
- TIPO DE INVESTIGACIÓNp. 32
- DISEÑO ADOPTADOp. 32
- TÉCNICA DE RECOLECCIÓN DE LA INFORMACIÓNp. 33
- Fuentes primariasp. 33
- Fuentes secundariasp. 33
- HIPÓTESISp. 33
- VARIABLESp. 33
- Variables Independientesp. 33
- Variables Dependientesp. 34
- Variables Intervinientesp. 34
- OPERACIONALIZACIÓN DE VARIABLESp. 34
- PROCESAMIENTO DE LA INFORMACIÓNp. 35
- ANÁLISIS DE RESULTADOSp. 36
- DESCRIPCIÓN DEL PROCESOp. 36
- Balance de materia del procesop. 37
- Alimentación a la columna:p. 39
- Corriente de destilado y fondos:p. 39
- Selección del ambiente de la torre de destilaciónp. 40
- Condiciones resultantes del diseño de la torrep. 43
- Dimensionamiento de la torre:p. 46
- Reducción de las ppm de nitrato en base amoníaco:p. 47
- CONCLUSIÓNp. 54
- RECOMENDACIONESp. 55
- REFERENCIASp. 56
- Fig. 3 Diagrama de flujo metodología del proyecto fuente: Autorasp. 35
- Fuente: Autorasp. 66
- Fig. 5 Balance de corrientes en columna. Fuente: Autorasp. 37
- Fig. 6 Diagrama equilibrio amoníaco-agua a 104°F y 15 psig. Fuente: Autorasp. 40
- Fig. 7 Elección del paquete termodinámico. Fuente: Autorasp. 41
- Autorasp. 43
- Fig. 9 Temperatura de operación vs etapas en la torrep. 44
- Fig. 10 Presión de operación vs etapas en la torrep. 45
- Fig. 11 Flujo de operación vs número de etapas en la torrep. 46
- de amonio Yara-Cartagena. Fuente: Autorasp. 49
- Fig. 13 Datasheet Intercambiador E-102. Fuente: Autorasp. 50
- Fig. 16 Datasheet intercambiador E-100. Fuente: Autorasp. 52
- Fig. 17 Identificación de corrientes en el enfriador E-101. Fuente: Autorasp. 52
- Tabla 4. Propiedades de los fluidos…………………………………………………p. 36
- ANEXO A. MANUAL DETALLADO DE SIMULACIÓNp. 61
- ANEXO B. DATASHEET TORRE DESTILACIÓNp. 71
- ANEXO C. DATASHEET INTERCAMBIADORESp. 72
- ANEXO D. VARIABLES DE PROCESO PARA EL DISEÑO DEL ENFRIADORp. 73